Fixit.com/. iFixitiFixit is a global community of people helping each other repair things.
Let's fix the world, one device. We stopped by the European Parliament in Brussels to show some folks there how to fix their phones. The repair-focused. Fix the Planet. Dull69.womensvictoryopen.com/ shopsmith- repair- manual- planer-xuvjjqe.pdf Shopsmith Repair Manual Planer.
Shopsmith jointer manual - free eBooks download. Shopsmith jointer manual download on apexjournals-3.org free books and. Dec 02, 2015.
Planer-Jointer 320 mm (1242') MODEL 2030N With Electric Brake INSTRUCTION MANUAL SPECIFICATIONS I Cutting I Max. Cutting depth I Feed rate /man width Feed Width 0 mm - 150 mm 150 mm - 240 mm 240 mm - 320 mm High Low 320 mm I O ' - 5-7/87 l5-7/8' - 9.1/2'1 (9-112' - 12.1/2'1 speed speed Auto feed.weed 1121'2' High speed 2 mm 15/64') 1.5mm11/16'l 1 mm15/128'1 8 m 5 m Low speed 3 mm I118') 2 mm 15/64') 1.
5 m m 1 1 / 1 6, ) 126ft.l ( 1 7 f t I Manual feed 3mm (1/8') Table SIZE Fence size Stock height Auto feed 320mmx 600mm 112.112' x 23-518') 12.7 mm - 185 mm ( 1 12' - 7-114') Manual feed 155' x 1,MOmm l6-1/8'x 59') 730mmx 105' 128-3/4'x 4-1/8'1 No. Of knives No load speed Overall length IW x L x H I Net weight 2 7,000 R/min. 780 mm x 1,500 mm x 775 mm 1303/4' x 59' x 30-1 /2'l 150 kg 1330 Ibs). BEFORE CONNECTING YOUR TOOL TO A POWER SOURCE Be sure you have read all GENERAL POWER TOOL SAFETY RULES GENERAL SAFETY PRECAUTIONS (For All Tools) 1. KNOW YOUR POWER TOOL. Read the owner's manual carefully. Learn the tools applications and limitations, as well as the specific potential hazards peculiar t o it.
KEEP GUARDS IN PLACE and in working order. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking t o see that keys and adjusting wrenches are removed from tool before turning it on. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. DON'T USE IN DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations, or expose them t o rain. Keep work area well lighted. KEEP CHILDREN AWAY.
All visitors should be kept safe distance from work area. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys. DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed. USE RIGHT TOOL.
Don't force tool or attachment t o do a job for which it was not designed. WEAR PROPER APPAREL. Wear no loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty.
Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses. Use clamps or a vise to hold work when practical. It's safer than using your hand and it frees both hands t o operate tool. DON'T OVERREACH. Keep proper footing and balance at all times. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories. DISCONNECT TOOLS before servicing; when changing accessories such as blades, bits, cutters, and the like. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position before plugging in. USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommended accessories. The use of improper accessories may cause risk of injury t o persons.
NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked t o determine that it will operate properly and perform its intended function - check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced. DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't leave tool until it comes to a complete stop. PROPER GROUNDING.
This tool should be grounded while in use to protect the operator from electric shock. EXTENSION CORDS: Use only three-wireextension cords which have threeprong grounding-typeplugs and three-polereceptacles which accept the tool's plug. Replace or repair damaged or worn cord immediately. VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY t o the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor.
GROUNDING INSTRUCTIONS ALL GROUNDED, CORD-CONNECTEDTOOLS: In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current t o reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-groundingconductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided -if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
Improper connection of the equipment-groundingconductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-groundingconductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-groundingconductor to a live terminal. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as t o whether the tool is properly grounded. This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Figure A.
The tool has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter, which looks like the adapter illustrated in Figure B and C, may be used t o connect this plug t o a 2-polereceptacle as shown in Figure B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green-coloredrigid ear, lug, etc. Extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. GROUNDING METHODS FIG. C t -Cover of Grounded - Outlet Box Grounding Pin Grounding Means.
ADDITIONAL SAFETY RULES 1. Don't use the tool in presence of flammable liquids or gases. Handle the blades very carefully. Check the blades carefully for cracks or damage before operation. Replace cracked or damaged blades immediately. Be sure the planer blade installation bolts are securely tightened before operating. Sharpen both blades evenly, or replace both blades or both cutterhead covers at the same time.
Never make jointing or planing cut deeper than 3.2 mm (1/8inch). Remove nails and clean the workpiece before cutting. Nail, sand or other matter can cause blade damage. Make sure the blade is not contacting workpiece before the switch is turned on. Wait until the blades attain full speed before cutting. Keep hands away from rotating parts. Stop operation immediately if you notice anything abnormal.
Always switch off and wait for blades t o come t o a complete stop before adjusting any parts, cleaning out chips or approaching the blade. Never stick your finger into the chip chute. Chute may jam when cutting damp wood. Turn off the planer-jointerand then clean out chips with a stick.
Do not touch blades right after operation, they may be extremely hot and could burn your skin. Don't abuse cord. Never yank cord to disconnect from receptacle. Keep cord from heat, oil and sharp edges. Do not use auto-planerand jointer at the same time. Overloading of the motor can occur.
![]()
ADDITIONAL SAFETY RULES FOR JOINTER 1. Maintain the proper relationships of infeed and outfeed table surfaces and cutterhead blade path. Do not perform jointing operations on material shorter than 140 m m (5-112inches), narrower than 19 m m (3/4 inch), or less than 12.7 mm (112inch) thick. Do not perform planing operations on material shorter than 140 m m (5-1/2inches), narrower than 19 m m (314 inch), wider than 155 m m (6-118inches) or thinner than 12.7 mm (1/2 inch). Support the workpiece adequately at all times during operation. Do not back the work toward the infeed table. Always use hold-downlpushblocks for jointing material narrower than 76.2 mm (3inches), or planing material thinner than 76.2 mm (3inches).
SAVE THESE INSTRUCTIONS. ADDITIONAL SAFETY RULES FOR AUTO-PLANER 1. Two or more pieces of narrow but similar thickness stock can be passed through the auto-planerside by side. However, allow some spacing between the stock to permit the feed rollers t o grip the thinnest piece.
Otherwise, a slightly thinner piece could be kicked back by the cutterhead. WARNING For Your Own Safety, Read Instruction Manual Before Operating Jointer 1. Wear eye protection. Never perform jointing or planing operation with cutter head or drive guard removed. Never make jointing or planing cut deeper than 3.2 mm (1/8 inch).
Always use hold-downlpushblocks for jointing material narrower than 76.2 mm (3inches), or planing material thinner than 76.2 m m (3inches). Do not attempt t o perform an abnormal or little-usedoperation without study and the use of adequate hold-down1pushblocks, jigs, fixtures, stops, etc. SAVE THESE INSTRUCTIONS.
HOW TO USE AUTO-PLANER 1. Adjusting depth of cut The maximum depth of cut changes in terms of the cutting speed and the width of the workpiece to be cut. Insert the workpiece flush with the infeed table top so that the front end of the workpiece reaches a t least 20 to 30 mm (3/4 to 1-1/8') beyond the depth gauge. Turn the crank handle and align the depth gauge with a graduation on the scale plate. This graduation indicates the depth of cut.
Dimensional adjustment The graduation on the scale bar aligning with the arrow i s the thickness of the workpiece after the cut. When cutting less than the maximum depth of cut, first align the graduation for the desired finished thickness with the arrow and then cut the workpiece. Switchover of cutting speed Turn the speed change lever to the right for high speed, and to the left for low speed. Change speeds while the tool i s running, but do not attempt to do so during an actual planing operation. Chip deflector The ejecting distance of chips can be adjusted by means of the chip deflector. To eject the chips in the near area, set the chip deflector down. CAUTION: When making heavy cuts, always set the chip deflector a t the upper position to prevent the chip chute from jamming.
Cutting depth Set the depth of cut with the depth adjustment knob while watching the graduation on the scale plate. Fence angle (0 - 45') Set the depth of cut to '0' graduation. Loosen the thumb screws holding the fence in place. Pull out the fence by at least 25 m m (1') and tighten the thumb screws. Loosen the hex bolts (A ) and (B) and tilt the fence. 7 At the desired angle, tighten the hex bolts, making sure that the bolt (A) is tightened first and the bolt (BI second.
Makita 300mm Planer Jointer
(Refer to Fig. About 0.5 mm (1/64') clearance between, the lower edge of the fence and the table top is necessary for the correct setting. Switch action To start the tool, the key and the ONbutton must be pressed in. Press the OFF-buttonto stop. The tool is switched off automatically when the electric current i s cut off. CAUTION: When not using the tool, remove the key.
Are All Plantations the Same?- 7.1.3. Hydrology australian introduction ebook reader. Runoff Curve Approaches to Plantation Water Use.- 7.2.1. Defining the “Water Use” of a Plantation.- 7.2. What is Different About Plantations?- 7.1.2.
(This prevents unauthorized operation.) Fig. Auto-Planer Determine the depth of cut and the cutting speed in terms of the width of the workpiece you intend to cut. Insert the workpiece flush with the table top. When cutting the long and heavy workpiece, lift up the end of the workpiece slightly a t the start and the end of cutting to avoid gouging or sniping a t the extreme ends of the workpiece.
Two rollers are provided on top of the Return (for another pass) I chip cover to enable quick, efficient return of the workpiece to the infeed table side. This i s especially convenient with two operators. CAUTION: Stop the tool when the workpiece i s stalled. Keeping the tool running with a stalled workpiece causes the abnormal wearing of the feed rollers. Jointer Placement of hands during feeding At the start of the cut, the left hand holds the workpiece firmly against the infeed table and fence, while the right hand pushes the workpiece toward the blade. After the cut is under way, the new surface rests firmly on the outfeed table. The left hand should press down on this part, a t the same time maintaining flat contact with the fence.
The right hand presses the workpiece forward and before the right hand passes over the cutterhead it should be moved to the workpiece on the outfeed table.
'G Mulcaster' wrote in message news:[email protected]. Hi folksI have a Makita 2030 Planer-Jointer and the jointer infeed table needs adjusting. Does anyone know how to adjust these? No luck at the Makita manuals download site. Thanks for any help. Regards, Gary The site has the 2030N manual and it shows the adjustment knob in Fig 27 and on the parts breakdown on page 23.
Look for some kind of screw lock for the infeed table height adjustment - most jointers have some sort of locking device on that adjustment.
Hi tjmiller, There are shops that will recoat feed rollers. A quick google search should come up with a few different services.
Replacing your rollers may be a faster, easier and simpler method of repair. The down time while you wait for the recoating will likely be much longer than simply replacing them. Also, new rollers are guaranteed to work.
I'm not saying that a good recoating job wouldn't but there is always the risk that the size may come out slightly wrong and they would need to be fixed. Again, taking more time. What I am getting at is when you buy factory parts you know they will work the first time.
I hope this helps! -UtahAV -Mark. Hi tjmiller, There are shops that will recoat feed rollers.
A quick google search should come up with a few different services. Replacing your rollers may be a faster, easier and simpler method of repair. The down time while you wait for the recoating will likely be much longer than simply replacing them. Also, new rollers are guaranteed to work. I'm not saying that a good recoating job wouldn't but there is always the risk that the size may come out slightly wrong and they would need to be fixed.
Again, taking more time. What I am getting at is when you buy factory parts you know they will work the first time.
I hope this helps! -UtahAV -Mark. I bought this machine new in 1979 when I first opened my cabinet shop, thinking it would be good enough to get me started in business and I could afford something better. It's been used every day for the last 33 years and has never let me down. I have no idea how much lumber I've run through it, but it has to be in the hundreds of thousands of feet. In 1996 I replaced both planer cutterhead bearings. Only one was bad, but I had it apart anyway so I did both.
In '97 I replaced the feed rollers. They still look great today. I recently had a bearing noise coming from the motor so, I took it apart today an found the back bearing is failing. The stator is a bit warn down so I ordered a new armature assembly that includes new bearings. Once I instal that, I expect to be as good as new.
This machine is going to long outlast me. It's the best buy I ever made on machinery.
Check the brushes for the motor first, make sure they're in good shape, or replace them as they're fairly inexpensive, this is the most common issue, especially if you picked it up second hand, or have been using it for a while. Then, yes, I would try the switch.
Unless to motor is shot, which you might be able to smell it and tell if it's burnt, it's most likely either the brushes, or the switch. Of course, I'm presuming you're using the thumb lock out before you pull the switch;-) but since you didn't say. And yes, there are some people.:-) Answered on Jul 04, 2017 387 views.
I can't find this saw at Makita; so, generally. Follow all safety precautions.:-) If the saw is running rough, the first thing I'd check is the brushes for the motor, especially if it has any age. These are fairly inexpensive and will solve a lot of woes. The next thing would be to check the thumb switch, if it has one. This is the switch that allows you to pull the trigger to run the saw, if it's just a button, then check the actual trigger switch to make sure it's working properly as it probably, not always, also engages the brushes to reverse the motor for a second, to slow it down so it stops faster. So, check the brushes on the motor, if they show any signs of wear, it's probably them. 2nd, check the switch.
Please let me know and if I've helped, give me a vote up. Thanks. Answered on Jul 04, 2017 389 views. If you're talking about the lock that holds it in the lowered postion for moving or transporting the unit, it requires a slight downward pressure before the pin will move.
Press down, and then pull the pin. If this isn't lock you're talking about, please provide more details; also, if this is the lock, and it still won't move, it could have gotten bent. If new, contact the manufacturer, if not new, then you might just have to apply more pressure to move it from the detent position.
Makita 2030 Planer Blades
Answered on Jul 04, 2017 780 views.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |